Built-In TEMP Digital RS485 Interface PH Sensor For Water Treatment Monitoring
The online digital pH sensor adopts an industrial online electrode, and the front end of the electrode is a flat structure, which is easy to clean. Built-in temperature sensor, can automatically temperature compensation, suitable for online long-term monitoring of the environment. The sensor adopts RS485 output and supports Modbus, which can realize networking and system integration without a controller.
Specification:
| Product Name | PH sensor electrode |
| Product Model | DPH700-YD01A |
| Brand Name | Daruifuno |
| Electrical Isolation | Without |
| Signal Type | Digital(RS485 interface) |
| Measuring Range | PH: 0~14pH TEMP: 0~50℃ |
| Resolution | 0.01pH/0.1℃ |
| Accuracy | ±0.02pH |
| Temperature Compensation | Automatic, built-in temperature unit |
| Calibration Method | Zero position/slope/deviation |
| Work Pressure | 0~2Bar |
| Operating Temperature | 0.0~50.0℃ |
| Shell Material | ABS |
| Dimension | Diameter: 35mm Total length: 260 mm ( include cleaning cover) |
| Installation Size | 1"NPT at both ends of the installation thread;
insertion depth 100 (including cleaning plug 115) |
| Protection Grade | IP68 |
Please click the user manual of RS485 pH sensor here:
DPH7 digital pH User Manual.pdf
Features＆ Advantages
● All-in-one package, can be used with the online transmitters, DTU, and portable instruments
● RS485 interface, Modbus RTU, support access to standard industrial control system
● The protection grade is IP68, can work continuously and stably under water for a long time
● Internal storage of calibration data, support offline calibration, plug and play on site
Aplication:
Water treatment monitoring
Drinking water,surface water,water quality analyze,ground water,ect.
Industrial process monitoring and dosing control
Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.
FAQ
1. What is the measurement principle of this pH electrode?
A: The pH value potentiometric method uses the potential difference of glass electrodes for pH measurement.
2. How to judge the pH of the solution?
A: If the internal hydrogen ion concentration of the pH glass bulb is lower than the outside, the measured solution is recorded as acidic and the pH value is lower than 7; if the two are the same, the solution is neutral and the pH value is equal to 7; if the internal hydrogen ion concentration is higher than externally, the measured solution is alkaline and the pH value is higher than 7.
3. What is the wire length of the pH electrode?
A: The lead wire of this electrode is 1 m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.
4. How often must the pH sensor be calibrated?
A: Depends on the type of sample:
Dirty samples and non-aqueous samples require more frequent calibration.
Depends on the required accuracy:
For very accurate measurements, at least daily calibration is required.
Depends on the quality of the electrode:
Old electrodes require more frequent calibration.
Product Tags:
|
|
Built-In TEMP Digital RS485 Interface PH Sensor For Water Treatment Monitoring Images
|
